The spray dryer is mainly used in universities, research institutes and laboratories of food, medicine and chemical enterprises to produce micro-particle powder, and has wide applicability to all solutions such as emulsions and suspensions.
1.Bipolar spiral hot air distributor, hot air is more even.
2.The high-efficiency volute cyclone separator is used for material recovery, and the recovery speed is faster.
3.Cooling water pipe, circulating water cooling centrifugal pump motor, it is necessary to ensure that there is cooling water circulating during work.
4.All components of the whole machine are integrally formed, all 304 stainless steel, anti-corrosion and easy to clean.
5.The operating noise of the whole machine is low, less than 50 decibels, and it is not noisy to use in the laboratory.
6.Use the touch screen to display operation, control temperature, air flow, air pressure, pump speed and deblocking frequency, etc.
High-quality high-borosilicate heat-resistant glass breaking drying chamber, high-quality high-borosilicate heat-resistant glass cyclone separator, high-quality high-bay silicon heat-resistant glass sample collection bottle, high-quality high-borosilicate heat-resistant glass rot sample collection tube, feeding silicone tube, Clamps and so on.
Free maintenance for life
Technical engineers can receive overseas training
Remote technical consultation
Video guide installation
Free replacement of certain accessories
1. How to clean spray-dried accessories?
Main unit: Open the door, remove all connecting pipes, clean up the tower wall inside the main unit, and sticky waste on the pipes.
Nozzle: Before you finish the experiment and finish feeding, you need to clean the internal pipeline with clean water (solvent that can dissolve the material). Finally, remove the pump head to clean the nozzle, shell and other sticky parts.
Fan: Check if there is any waste accumulated in the air inlet filter. If there is, clean it up.
2. What is a spray drying liquid atomization system?
In the spray dryer system, the atomizing nozzle is a crucial element, and there are usually four nozzles with 0.7mm, 1.0mm, 1.4mm, and 2.0mm apertures to choose from. According to different materials and solutions, the selection of nozzles should be consulted with product experts or selected after experiments. The experimental process of spray drying should achieve a complete set of process methods for the successful drying of a certain material. Each experimental parameter is an integral part of the whole process method.
3. What are the types of spray dryers?
2L spray drying, 5L spray drying, 10L spray drying, super large spray drying.