Spray dryer in food and milk industry

Advantage:

The spray dryer is compact and self-contained, and can run without other facilities. Compressors, fans, heaters, control systems, nozzles, etc. all use high-quality components. The stability of the equipment is good and the collection rate of the product is high.

Features:

1. All glass parts are easy to disassemble and clean.

2.Built-in oil-free air compressor, the particle diameter of the powder is distributed normally, the fluidity is good, and the noise is very low.

3. It can be used when it is powered on, without any auxiliary facilities.

4.The heating system is equipped with an overheating protection device to ensure the safe use of the instrument.

5.The speed of the fan adopts the method of frequency conversion to make the air volume and speed of the system continuously adjustable.

6.The built-in strong magnetic stirring device makes the concentration of the material solution even, ensuring the smooth progress of the spray drying process and the uniformity of the powder particles.

Included accessories:

High-quality high-borosilicate heat-resistant glass breaking drying chamber, high-quality high-borosilicate heat-resistant glass cyclone separator, high-quality high-bay silicon heat-resistant glass sample collection bottle, high-quality high-borosilicate heat-resistant glass rot sample collection tube, feeding silicone tube, Clamps and so on.

After sale:

Free maintenance for life

Technical engineers can receive overseas training

Remote technical consultation

Video guide installation

Free replacement of certain accessories

FAQ:

1. What is the process of switching on and off the spray dryer?

Start the equipment after turning on the power supply. When the temperature at the inlet and outlet of the equipment is stable (the outlet temperature is above 90 degrees), use advanced clean water and adjust the feed rate to ensure that the water can be completely spray-dried and there is no water droplets on the tower wall before feeding;

When you stop feeding, you need to clean the pump with clean water immediately, then stop heating and feeding, and then turn it off after the temperature drops to 50 degrees. If the power supply suddenly stops feeding during the experiment, the material in the pump will dry up to powder under the action of high temperature, which will block the feeding pipe.

2. What are the heating methods for large spray dryers?

Electric heating, steam, diesel, gas, etc.

3. What are the types of spray dryers?

2L spray drying, 5L spray drying, 10L spray drying, super large spray drying.